Kayenne Video Production Center



The World\'s Most Powerful Switcher
Kayenne with K-Frame brings the highest level of performance available to live productions with the innovative features and upgradability only from Grass Valley. You can mount the unique Kayenne control flat or in a banked curve, and configure Kayenne with full multiformat support including 1080p and 4K. And its familiar design makes it ideal for environments where freelancers are employed. When needed, Kayenne can adapt to offer up to 192 inputs, 96 outputs and up to 9 M/Es with six keyers in every full M/E.

Kayenne K-Frame S-series switchers are now available with IP I/O for SMPTE 2022-6 connectivity. See the K-Frame S-series IP I/O webpage for more information.


K-Frame

K-Frame Standard Frame:
Up to 192 inputs and 96 outputs
Up to 9 M/Es, accessible across two suites — by using DoubleTake this may be increased to 18 virtual M/Es
Every M/E has six keyers with standard keying modes including chromakey, two frame stores per keyer — every keyer except for Controller M/E can use the pool of floating 3D iDPMs
2D DPMs (resizers) on every keyer, with 6 pairs per M/E so iDPMs can be utilized for more complex effects
The Controller M/E has a complement of 6 full keyers with chromakey and 2D DPMs
Up to 16 iDPMs (integrated Digital Picture Manipulators), assigned as either floating iDPMs or within an eDPM at user’s discretion
K-Frame Compact Frame:
Up to 80 inputs and 48 outputs
Up to 5 M/Es, accessible across two suites — by using DoubleTake this may be increased to 10 virtual M/Es
Every M/E has six keyers with standard keying modes including chromakey, two frame stores per keyer — every keyer except for Controller M/E can use the pool of floating 3D iDPMs
2D DPMs (resizers) on every keyer, with 6 pairs per M/E
The Controller M/E has a complement of 6 full keyers with chromakey and 2D DPMs
Up to 8 iDPMs (integrated Digital Picture Manipulators), assigned as either floating iDPMs or within an eDPM at user’s discretion
General

Fully digital 10-bit 4:2:2 video switcher including Future-Ready 4K and 1080p (level A or B) support
Optional smart I/O modules provide up/down/crossconversion when licensed with SetDef/MatchDef
Integrated macro builder/editor allows users to edit macros online or offline on a PC running the menu application
Optional DoubleTake (split M/E mode) effectively increases the number of M/Es and adds flexibility to Suites operation while FlexiKey programmable clean feed mode supports separately programmable configurations of keyers from four M/E outputs
Aux bus transitions for dissolves/wipes on aux bus outputs
Interfaces with Grass Valley routers and Kaleido multiviewers and their control systems
Optional integrated Image Store capable of delivering up to 32 GB storage of Stills (3,000 images) or “Movies” (a total of 50 seconds) of 1080p video
LDK Series & LDX Series camera control with Ethernet tally via Connect Gateway
Optional integrated external ClipStore provides multiple channels of video/key pairs for up to 10+ hours of nonvolatile video/key/audio clip content
999 macros with many new ways to recall macros from the panel
1,000 E-MEM registers with Define E-MEM for fine control in creation and editing of effects
Optional M/E Previewer provides a method to check and monitor any input to an M/E
VDCP Ethernet connection for stadium applications
Ethernet tally connection for integration with external tally systems
Optional RGB color correction on M/E buses and aux bus outputs
Source Rules:
Links keyers to sources
Settings for on-off-left alone on every M/E
Full look-ahead preview of rules
Hot-swappable, front/rear removable modules and power supplies
Optional multiple multiviewer capability with 5 pre-configured layouts (maximum 14 panes per layout) with On-Air and Preview tally
Kayenne Control Panel Features In Depth

Modular control panel surface with hot-swappable modules
Completely quiet environment at the technical director’s fingertips, as the control panel has no fans or processors to create noise
RGB button illumination highlights for context and function clarity
System bar on panel with up to six device control windows, switched preview, aux bus delegation and macro controls
Optional panel Device Control Module for integrated machine control with Q-MEM cue library for server/VTR content
Mechanical Specifications
ComponentDepthWidthHeightWeightRack Units
Control PanelsFlat Support Structure Orientation
KAYN-PNL-100-15*356.4 mm (14.03 in.)758.3 mm (29.85 in.)84.3 mm (3.32 in.)14.5 kg (32.0 lbs.)n/a
KAYN-PNL-200-25488.4 mm (19.23 in.)1341.7 mm (52.82 in.)84.3 mm (3.32 in.)29.9 kg (65.8 lbs.)n/a
KAYN-PNL-200-35488.4 mm (19.23 in.)1533.7 mm (60.38 in.)84.3 mm (3.32 in.) n/a
KAYN-PNL-300-25637.1 mm (25.08 in.)1341.7 mm (52.82 in.)84.3 mm (3.32 in.) n/a
KAYN-PNL-300-35637.1 mm (25.08 in.)1533.7 mm (60.38 in.)84.3 mm (3.32 in.)44.7 kg (98.4 lbs.)n/a
KAYN-PNL-400-25746.3 mm (29.38 in.)1341.7 mm (52.82 in.)84.3 mm (3.32 in.) n/a
KAYN-PNL-400-35746.3 mm (29.38 in.)1533.7 mm (60.38 in.)84.3 mm (3.32 in.)57.3 kg (126.2 lbs.)n/a
KAYN-PNL-AUX-25185.7 mm (7.31 in.)621.7 mm (24.48 in.)84.3 mm (3.32 in.)6.1 kg (13.4 lbs.)n/a
KAYN-PNL-AUX-35185.7 mm (7.31 in.)813.7 mm (32.04 in.)84.3 mm (3.32 in.)6.3 kg (13.8 lbs.)n/a
KAYN-PNL-MENU91.7 mm (3.61 in.)417.85 mm (16.45 in.)270.10 mm (10.63 in.)6.2 kg (13.5 lbs)n/a
PCU
KAYN-PNL-PCU588.52 mm (23.17 in.)482.60 mm (19 in.)133.35 mm (5.25 in.)16.06 kg (35.4 lbs.)3
Frames
K-FRM-100C (6 RU)558.8 mm (22.0 in.)482.8 mm (19 in.)266 mm (10.47 in.)37.42 kg (82.5 lbs.)6
K-FRM-100S (13 RU)566.2 mm (22.29 in.)482.8 mm (19 in.)577.1 mm (22.72 in.)55.1 kg (121.0 lbs.)13
K-FRM-PSU-FRAME (1 RU)**492 mm (19.37 in.)483.1 mm (19 in.)44 .0 mm (1.75 in.)10.5 kg (23.0 lbs.)1
Weights for the K-FRM-100C and K-FRM-100S are with fully populated units
* w/o Local Aux module.
** Frame weight is with two power supplies. A single supply weighs 2.5 kg (5.4 lbs.). The K-FRM-PSU-FRAME supports up to three power supplies..

FrameM/EsInputsOutputsGPI Inputs Per BoardGPI/Tally Outputs Per BoardSmart I/O (MatchDef/SetDef)
Compact 6 RU1 to 5*32 to 64 plus up to 16 Smart I/O16 to 32 dual plus up to 16 Smart I/O8 per input32 per input boardEach Smart I/O card provides 4 inputs and 4 outputs with 4 up/down/crossconversion (MatchDef/SetDef) capability
Standard 13 RU1 to 9*32 to 160 plus up to 32 Smart I/O16 to 64 dual plus up to 32 Smart I/O8 per input32 per input board
Board Count
Compact 6 RUUp to 2 M/E boards (two M/Es per board)Up to 2 input boards (32 inputs per board)Up to 2 output boards (16 dual outputs per board)  Up to 4 I/O modules
Standard 13 RUUp to 4 M/E boards (two M/Es per board)Up to 5 input boards (32 inputs per board)Up to 4 output boards (16 dual outputs per board)  Up to 8 I/O modules
* Includes Controller M/E.

Video Standards
3G Mode:
  • 1080p 50 Hz SMPTE 425-1 section 4 - Level A
  • 1080p 59.94 Hz SMPTE 425-1 section 4 - Level A
  • 1080p 60 Hz SMPTE 425-1 section 4 - Level A
  • 1080p 50 Hz SMPTE 425-1 section 5 - Level B
  • 1080p 59.94 Hz SMPTE 425-1 section 5 - Level B
  • 1080p 60 Hz SMPTE 425-1 section 5 - Level B
HD Mode:
  • 1080i25/29.97/30
  • 1080PsF23.976/24/25/29.97/30
  • 720p50/59.94/60
SD Mode:
  • 525i59.94
  • 625i50
Serial Digital Video Inputs
Interface:
  • 3G video formats SMPTE 424M-2006
  • HD video formats SMPTE 292M-1998
  • SD video formats SMPTE 259M-1997 ITU-R BT.656
Return loss: 
  • >15 dB, 5 MHz to 1.5 GHz
  • >10 dB, 1.5 GHz to 3.0 GHz
Type of connector: 75Ω BNC (SMPTE 259M)
Nominal amplitude: 800 mVp-p terminated
Input impedance: 75Ω
Max. cable length: using Belden 1694A type cable
  • 3G video 140m (459 ft.) typical
  • HD video 200m (656 ft.) typical
  • SD video 350m (1,148 ft.) typical
Serial Digital Video Outputs
Interface:
  • 3G video formats SMPTE 424M-2006
  • HD video formats SMPTE 292M-1998
  • SD video formats SMPTE 259M-1997 ITU-R BT.656
Return loss:
  • >15 dB, 5 MHz to 1.5 GHz
  • >10 dB, 1.5 GHz to 3.0 GHz
Type of connector: 75Ω BNC (SMPTE 259M)
Nominal amplitude: 800 mVp-p across 75Ω
Rise and fall times: 
  • 3G & HD video formats ≤ 135 ps between 20% and 80% amplitude
  • SD video formats, 400 to 1400 ps between 20% and 80% amplitude
Timing jitter:
  • 3G video formats ≤ 2.0 UI
  • HD video formats ≤ 1.0 UI
  • SD video formats ≤ 0.2 UI
Alignment jitter:
  • 3G video formats ≤ 0.3 UI
  • HD video formats ≤ 0.2 UI
  • SD video formats ≤ 0.2 UI
Output impedance: 75Ω
DC offset: <500 mV with 75Ω termination
Ancillary and embedded data: blanked or passed (user selectable)
EDH: blanked
Analog Reference Input
Video standard: Analog Black or Tri-level sync
Return loss: >40 dB, up to 5 MHz
Connectors: 2 BNC loop-through
Impedance: 75Ω external termination
Communications
Connections:
  • PCU to video frame: LAN cable 100m (328 ft.) max. length
  • Control panel to PCU: dedicated cables, choice of 7.5m or 15m
  • Menu panel to PCU: dedicated cables, choice of 7.5m or 15m
Interoperability: The Video Production Centers are interoperable with the Encore, Jupiter, SMS-7000 and NV9000 routing control systems; LDK Series and LDX Series cameras using Connect Gateway; and with the K2 media server family (including the K2 Summit and K2 Solo), legacy Profile servers, M-Series iVDRs, Turbo iDDRs and T2 iDDRs. 
Supported Control Protocols
The Video Production Centers support Ethernet and serial AMP protocol (standard in all systems), serial BVW and Odetics protocols, as well as controlling devices using PBus II and GPIs 
  • Serial BVW-75 for VTR control
  • AMP (advanced media protocol) for Profile PVS, Profile XP Media Platform, K2, M-Series, Turbo iDDR and T2 iDDR systems over Ethernet and serial
  • Grass Valley native protocol for routers/routing control systems (Trinix/Trinix NXT, Venus, Triton, NVISION and third-party routers; Jupiter, Encore and NV9000 router control systems)
  • Ethernet tally
  • Grass Valley remote Aux Panels via Ethernet
  • Grass Valley editor protocol for edit controllers and external control
  • VDCP Serial and Ethernet
Power
Video Processing Frame 6 RU:
  • Line voltage: 100V-240 VAC ±10% power factor corrected
  • Automatic line-voltage sensing for 120V and 240V sources
  • Line frequency: 50/60 Hz ±5%
  • Power consumption: max. 900W
  • Leakage current: <2.5 mA
Video Processing Frame 13 RU:
  • Line voltage: 100V-240 VAC ±10% power factor corrected
  • Automatic line-voltage sensing for 120V and 240V sources
  • Line frequency: 50/60 Hz ±5%
  • Power consumption: max. 1400W
  • Leakage current: <2.5 mA
Control Panel:
  • Line voltage: 100V-240 VAC ±10% power factor corrected
  • Automatic line-voltage sensing for 120V and 240V sources
  • Line frequency: 50/60 Hz ±5%
  • Power consumption: max. panel configuration 600W
  • Leakage current: <2.5 mA
Environmental Conditions
Storage temperature: -20 to 70ºC (-4 to 158ºF)
Operating temperature: 0 to 40ºC (32 to 104ºF)
Relative humidity: 0-95% (non-condensing)
Electromagnetic environment: E2 (according to EN55103-1, -2)

See more related documents